AHL LED High Bay light,which breaks the traditional design concepts is compact in structure and elegant in appearance with lighter housing. AHL LED High Bay light adopts unique radiator fin, ensuring excellent heat dissipation performance.

High power LEDs with high efficiency up to 130lm/W are adopted to manufacture AHL LED High Bay light. Compared to COB light source, not only achieves higher luminous efficiency, but also perfectly assures LEDs’ heat dissipation. The housing temperature is lower than 65, which effectively control the lumens depreciation and guarantee the lifetime of the light source to more than 50,000 hrs.

High-quality secondary optical lenses are assembled on the LEDs, ensuring excellent lighting performance in different application areas. There are 3 types of light distribution, respectively wide angle(WA), narrow angle(NA) and high-rack angle (HR).

The driver of AHL High Bay light is characterized by the universal AC input voltage, built-in active PFC function, high efficiency (up to 93.5%) and long lifetime. The unique wire protection design improve the luminaries' reliability and capacity of resisting disturbance, and the technology of constant current control enhances the luminaries' stability. Furthermore, the driver also has several flexible and advanced control functions such as timer control, temperature control, photo sensor control, acoustic sensor control and internet control etc.

AHL LED High Bay light can replace the traditional light source--for instance, mercury lamp, high pressure sodium lamp and metal halide lamp etc. The luminaries can be extensively applied in various illumination places, such as workshop, factory, warehouse, supermarket, airport, railway station, and so on.

Note: 1. AHL Standard CCT :4000±250K, 5700±350K, other regions of CCT are customized.

Special Parameters

Remarks2. The tolerance of power is ±10%. Other power models are customized.
                   3. The tolerance of luminous flux is -10%.

Lumen Maintenance Curve

Note: This chart above shows the calculated lumen maintenance results after testing high-bay luminaries in volume, which can exactly reflect luminous flux degradation of AHL LED high-bay luminaries in use. In the real circumstances, the luminous flux would be influenced by weather or other natural surroundings. However, the lumen maintenance of our luminaries is above 95% after working for 10000 hrs is seen in the above graph.

Luminous Intensity Distribution Curve

WA                                                                                                        NA                                                                                                         HR

Note: There are many types of light distribution which can be selected by the installation environment. 

Mechanical Dimensions

Wiring Instructions

1.      Tri-core shield sleeve wire with standard 60245 IEC57(YZW3×1.0),OD Φ8~10mm is adopted, the brown wire of which connects the live wire, the blue one connects the neutral wire and the yellow-green one connects the ground wire.

2.      Please connect the light with Φ60 lamp pole, fasten the two M10 Hexagon screws with torque 17Nm. Please take care to keep the balance of the lamp during installation.

3.      Assuring the LED light works under the rated voltage, otherwise the non-restorable damage will be made once the supply voltage is beyond the working voltage range.


1.      The ground wire must be safely earthed to guarantee the reliability!

2.      The joint of wires must be covered with insulating tape and be waterproof!

3.      Screws must be installed firmly to avoid the light drifting!

4.      The supply voltage must not be beyond AC305V. Otherwise the impossibly repaired damage will be caused.

5.      The light should be scraped immediately if the external soft cables or soft wires damaged for they could not be replaced.

6.      Please change the protective glass if it is broken with 5mm thick CE approved temper glass.


After Sales Services

If you have any question or problem in the process of unpacking, installation and use, please contact our Customer Service Department. We will respond within 2 hours, and if necessary, we will promptly send our maintenance professionals to your site as quickly as possible to solve your trouble and restore to the normal working condition.

AHL takes guarantee responsibility unless otherwise specified in the following circumstances:

²   The breakdown or the damage is caused by incorrect installation, failure operation or use under the Not- specified working conditions.

²   The damage is caused by accident, abuse or misuse. The breakdown or the damage is caused by customers’ unsuitable safekeeping or transportation.

²   The breakdown or the damage are caused by customers’ disassembly or change the spare parts to which are not approved by AHL

²   The breakdown or the damage is caused by man-made or natural disaster


+ Bewertung

Hinweis: HTML ist nicht verfügbar!
    Weniger Gut           Gut

AHL AL-HB LED Industrie Beleuchtung

  • Hersteller AHL / AOD
  • Artikelnr. AL-HB
  • Verfügbarkeit Lagernd