Ø  Beautiful design, fashionable;

Ø  Aluminum alloy structure, Anti-corrosion coating surface treatment, suitable for outdoor, Lighter;

Ø  IP66opening seal design for Installation and maintenance;

Ø  Adopts Curve glassexcellent traffic induced ;

Ø  The unique heat dissipation fin design in the backwith diversion trench;

Ø  Better LED cooling, avoid the riskbroken line;

Ø  Proprietary constant current management technology assures high stability;

Ø  By different light distribution, both the uniformity of illumination and the uniformity of color on road are guaranteed effectively ;

Ø  Applied in many areas, such as express ways, main roads, residential communities,sidewalk.


Note:1、AHL Standard Color Temperature::3000±175K、4000±250K、5700±350K Other CCT can be Custom-made.
            2、Custom-made interface connector is accepted by AHL in case it is in need.


Note 1.The tolerance of power is ±10%


NoteAHL can adjust the luminous efficiency and power according to different requirement

Structural Dimensions



P507 Housing
Note:P507 Maximum frontal windward projected area is:0.178m2



P516 Housing
Note:P516 Maximum frontal windward projected area is:0.220m2



Note:This chart shows the actual testing data of many streets that exactly reflects luminous flux degradation of LED street lights in use. We can see that the maintaining luminous rate of our street lights is above 95% after working for 10000 hrs without maintenance.

Note:We can help you to choose the best light distribution according to the real road condition by simulation.

Installation Instructions



1.      Tri-core shield sleeve wire with standard 60245 IEC57(YZW3×1.0),OD Φ8~10mm is adopted, the brown wire of which connects the live wire, the blue one connects the neutral wire and the yellow-green one connects the ground wire.

2.      Please connect the light with Φ60 lamp pole, fasten the two M10 Hexagon screws with torque 17Nm. Please take care to keep the balance of the lamp during installation.

3.      Assuring the LED light works under the rated voltage, otherwise the non-restorable damage will be made once the supply voltage is beyond the working voltage range.


Attention

1.      The ground wire must be safely earthed to guarantee the reliability!

2.      The joint of wires must be covered with insulating tape and be waterproof!

3.      Screws must be installed firmly to avoid the light drifting!

4.      The supply voltage must not be beyond AC305V. Otherwise the impossibly repaired damage will be caused.

5.      The light should be scraped immediately if the external soft cables or soft wires damaged for they could not be replaced.

6.      Please change the protective glass if it is broken with 5mm thick CE approved temper glass.

 


After Sales Services

If you have any question or problem in the process of unpacking, installation and use, please contact our Customer Service Department. We will respond within 2 hours, and if necessary, we will promptly send our maintenance professionals to your site as quickly as possible to solve your trouble and restore to the normal working condition.

AHL takes guarantee responsibility unless otherwise specified in the following circumstances:

²   The breakdown or the damage is caused by incorrect installation, failure operation or use under the Not- specified working conditions.

²   The damage is caused by accident, abuse or misuse. The breakdown or the damage is caused by customers’ unsuitable safekeeping or transportation.

²   The breakdown or the damage are caused by customers’ disassembly or change the spare parts to which are not approved by AHL

²   The breakdown or the damage is caused by man-made or natural disaster

 



+ Bewertung

Hinweis: HTML ist nicht verfügbar!
    Weniger Gut           Gut

AHL LED Straßenleucht PAD V SERIES

  • Hersteller AHL / AOD
  • Artikelnr. AL-S-PAD V
  • Verfügbarkeit Lagernd